Install check valve
3
Install the machine
4
The install exhaust pipe
5
Install adjustable decorative cover
6
Install the check valve components together with the check
valve seal pad in the position of the rack outlet, tighten with
4 ST4.2 x 16 screws at random, check and make sure that
the disc is rotating flexibly.
Align the hole in the rear of the body to the hanger of the
body plate, and hang it from the top down; After hanging
the cooker hood, confirm the installation level of the
machine, and then use the randomly equipped M5 x 16
self-tapping lock screw to load the screw hole in the top of
the body plate to prevent the machine from falling off
accidentally.
Will exhaust pipe fixed ring on the exhaust pipe compo-
nent, one end of the exhaust pipe components installed
with loaded check valve outlet, then exhaust pipe fixed ring
threaded on the check valve, pressure exhaust pipe joint.
At the end of the exhaust pipe, the other end of the pipe is
directed to the indoor or public flue. If the exhaust pipe
does not match with the public exhaust pipe, it can be
converted to the after-sales department to purchase the
pipe reducer. If the pipe is too long, please adjust the long
pipe to the contraction state and fix it with adhesive tape to
prevent the pipe from swinging during the working process.
According to the installation height, adjustable decoration
to cover the required in the out of the wall two phi 8 mm
diameter, depth of 50 mm hole, the expansion pipe
pressure inside the manhole, provided with two M5 x50
cross slots countersunk head wood screw will cover
decoration hangs Taiwan reliable fixation. Adjustable
decorative cover to the corresponding height, and use the
2 ST4.2 x 9.5 cross flat head self-tapping screw with
random equipment on the wall.
The check valve
Hang hole
The body panels
Check valve gasket
Exhaust pipe
component
Fixed ring
Decoration
cover plate
Adjustable
decoration
cover
Exhaust pipe joint
Check valve outlet
2
3
4
5
6
7
8
9
1
1
11
12
