7
WARNING:
➢
For safety reason, please use only the same
size of fixing or mounting screws which are
recommended in this instruction manual.
➢
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Start Using Your Cooker Hood
Push button
1)
Push the stop button, and the motor will stop.
2)
Push the low button, and the motor will run at low speed.
3)
Push the middle button, and the motor will run at mid speed.
4)
Push the high button, and the motor will run at high speed.
5)
Push the light button and the two lights will illuminate. Push it again and the light
will turn off.
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
Fan switch turned off
Select a fan switch position.
Fan switch failed
Contact service center.
Motor failed
Contact service center.
Light does not
work, motor does
not work
House fuses blown
Reset/Replace fuses.
Mains power cable is loose or
disconnected
Refit mains power cable to
power outlet.
Switch power outlet on.
Oil leakage
One way valve and the outlet
are not tightly sealed
Take down the one way valve
and seal with sealant.
Leakage from the connection of
chimney and cover
Take chimney down and seal.
Lights not working
Broken or faulty bulbs
Replace blubs as per this
instruction.
