35
wiring rules allow for this variation of the requirements)
• the isolating switch will be easily accessible to the customer with the cooker installed
• you consult local building authorities and by-laws if in doubt regarding
installation
• you use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall surfaces
surrounding the cooker.
When you have installed the cooker, make sure that
• the power supply cable is not accessible through cupboard doors or drawers
• there is adequate flow of fresh air from outside the cabinetry to the base of the cooker
• if the cooker is installed above a drawer or cupboard space, a thermal protection barrier is
installed below the base of the cooker
• the isolating switch is easily accessible by the customer
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force
onto the controls protruding from the cooker.
Adjusting the bracket position
Fix the cooker on the work surface by screw 2 brackets on the bottom of cooker(see
picture) after installation.
Adjust the bracket position to suit for different table top thickness.
