TS
110
TS
112
Volume Mode
10
OPERATION
-80 dB
0 dB
-8 dB
-12 dB
-20 dB
-48 dB
1 Step = 2 dB
(1 LED = 4 Steps)
1 Step = 1 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 2 Steps)
Both controls feature the exact same response curve, which is not linear.
The increments become finer as the volume increases:
-80 dB (minimum) to -48 dB:
2 dB
-48 dB to -20 dB:
1 dB
-20 dB to 0 dB (maximum):
0.5 dB
•
Subwoofer Mute
To Mute the subwoofer, press briefly the Subwoofer Volume control. All
LEDs will turn off, except for the left-most LED, which lights up dimly.
!
To exit the Subwoofer Mute mode press the Subwoofer Volume control
once again. The subwoofer will return to the volume level it had before
being muted.
•
System Mute
To Mute the whole system (sub satellites), turn the System Volume
control counter clockwise until you reach the minimum level. When the
LED on the left end of the System Volume control lights up dimly the Mute
mode is activated.
!
To exit the System Mute mode simply turn the System Volume control
clockwise until you reach the desired volume.