Eve Audio ThunderStorm TS107, Product Manual, Page: 14 / 24

TS 108
TS 107
Remote Control
14 OPERATION
On/off: Standy Mode). Press the button again to exit the Standby mode.
•
LED Button
Use the LED button to select the LED mode of the subwoofer. The mode
changes every time you press the button (bright ring, bright point, dimly
lit ring, dimly lit point).
•
Phase Button
Press the Phase button to shift 180° the phase of the subwoofer signal
(see Sub Phase). The Sub Phase LED on the subwoofer lights on. Press the
button again to return the phase to 0°.
•
Pure Satellite Button
In case the subwoofer is connected via the XLR connections, use the Pure
Satellite button to mute the subwoofer (Mute function: see Subwoofer
Mute) so that the audio signal is transmitted without any filtering to the
satellite speakers. This allows you to switch easily between sate
subwoofer mode and pure satellite mode (without subwoofer and without
any filtering).
!
In case the subwoofer is connected to an EVE Audio SC203 Master/Slave
system via the dedicated RCA Unbalanced in, use the Pure Satellite button
to mute the subwoofer (Mute function: see Subwoofer Mute).
• System Volume (+)/(-) Buttons (only when using the XLR ins & outs)
Use the System Volume (+) and (-) buttons to increase or decrease the total
volume (sub satellites).
!
In case the subwoofer is connected to an EVE Audio SC203 Master/Slave
system via the dedicated RCA Unbalanced in, the System Volume (+) and
(-) buttons will affect only the subwoofer volume.
•
Sub Volume (+)/(-) Buttons
Use the Sub Volume (+) and (-) buttons to increase or decrease the
subwoofer volume, and thus balance the level between sub
satellites (see Subwoofer Volume Adjustment).
•
Sub Filter (+)/(-) Buttons
Use the Sub Filter (+) and (-) buttons to set the cutoff frequency of the
subwoofer’s low-pass filter and to select the LFE mode (see Sub Filter).
•
Mute Button (only when using the XLR ins & outs)
Press the Mute button to mute the whole system (sub satellites)
(see System Mute). Press the button again to exit the Mute mode.
!
In case the subwoofer is connected to an EVE Audio SC203 Master/Slave