EVCO S.p.A.
Vcolor
| Hardware manual ver. 1.0 | Code 144VCOE104
page 23 of 38
13.
Press and release the area “DOWN” to select
“
Save on USB
” or “
Save on memory
” (according
to the option selected in step 9).
14.
Press and release the area “ENTER”: it will be
started
the
download
of
the
configuration
parameters.
The download takes typically a few seconds; if the
operation is not completed succesfully, the display
will show an error indication (for example “
Status:
Read Error
”).
To quit the procedure, operate as follows:
15.
Press and release over and over again the area
“ESCAPE”.
