EVCO | 06.08.2021 | AZ
| 20
CAN
005_c-pro3OEM_ON-OFF_Cieco_Interfaccia_001_0.1_AZ
114CP3OEE104
c-pro 3 OEM -
Hardware manual
c-pro 3 OEM blind
EPJgraph
Key description
Key
Instructions
ON/STAND-BY
LEFT AND RIGHT
UP AND DOWN
ENTER
Through a remote user interface
Configuration
The following procedures show an example of how to configure a programmable controller through a remote user interface
(in the example EPJgraph):
1. Disconnect the power supply of the controller and the remote user interface
2. Connect the controller to the remote user interface through the CAN CANBUS port
3. Connect the power supply of the controller and the remote user interface
Switching ON/OFF the device from EPJgraph
Progression Description
1
Connect the controller to the remote user
interface through the CAN CANBUS port
2
Touch simultaneously the
LEFT
and
ENTER
keys
to access the “
Network Status (CAN)
” screen
3
Touch the
UP
or
DOWN
keys
to select the
correct Node (Status “
OK
”), touch
ENTER
key
4
To switch OFF the device switch OFF the power
supply
Accessing the procedure from EPJgraph
Key
Instructions
Touch simultaneously the
LEFT
and
ENTER
keys to
access the “
Network Status (CAN)
” screen
Touch the
UP
or
DOWN
keys
to select the correct
Node (Status “
OK
”)
Touch
ENTER
key to access the main screen
Touch
ON/STAND-BY
key a few times to return to
the previous displays
Password
Key
Instructions
Touch simultaneously the
LEFT
and
ENTER
keys to
access the “
Network Status (CAN)
” screen
Touch the
UP
or
DOWN
keys
to select the correct
Node (Status “
OK
”)
Touch
ENTER
key to access the main screen
Touch
UP
or
DOWN
keys to see the “
password
”
menu
Touch
ENTER
key to select the menu:
the display will show “
input password
”
Touch
ENTER
key to enter the password
Touch
UP
or
DOWN
keys to set-up the password
“-19”
Touch
ENTER
key to confirm the password