EVBox BusinessLine, Installation And Commissioning Manual

Page: 13 / 46

3. Product features
The charging station is compatible with all Mode 3 electric vehicles and is designed for both indoor
and outdoor use. Operation of the charging station is approved at ambient temperatures of between
-25 °C and +50 °C. The charging station can be connected to a Charging Management System (CMS)
for the registration of the number of kilowatt-hours (kWh) charged.
3.1. Description
Description
1. Charging station
The charging station can either be a Hub station or a Satellite station, and in any installation there
must be one Hub station (see
Hub-Satellite installations on page 21 ). Up to 19 Satellite stations
can connect to the Hub station.
◦
A Hub station includes the charge card reader, LED ring, Wi-Fi module, Bluetooth module,
cellular modem, smart charging module, and charging cable socket.
◦
A Satellite station includes the charge card reader, LED ring and charging cable socket.
The station is mounted on a ground pole, a wall pole, or directly to a wall.
2. Charge card reader
This is the area where you scan your charge card or key fob. Depending on configuration settings,
BusinessLine reads the data from your card to start or stop a charging session.
3. Socket
Connect the plug of a mode 3 charging cable to the socket.
4. LED ring
The LED ring indicates the status of BusinessLine.
Configurations
BusinessLine charging stations come in the following configurations:
• Single socket, communications hub.
• Single socket, satellite.
• Double socket, one communications hub and one satellite.
3. Product features
EN
9