Importer:
PHOYLO LTD, CZ684609501,
Enterprise House, Pass Street 2, 0L9 6HZ Oldham,
Manchester
, UK
Measured variables and user control display:
1. Travel time - since the last reset (TM) and overall (TTM)
2. Speed (km / h or MPH) - current speed, maximum speed recorded during the ride (MXS) and average speed
(AVS)
3. Mileage distance - Daily kilometers (DST) and the total distance (ODO)
4. Indication of drive and function accelerator
5. Indication of drive and function PAS (Pedal ASsistant)
6. Setting the degree of strength PAS (Pedal ASsistant)
7. Activates function pushing the bike with speed up to 6 km/h ( )
8. Aktivace tempomatu (
C
- Cruise)
9. Indicates the approximate state of the battery, when flashing: function recovery * (
)
10. Condition of the battery voltage in Volts (VOL)
11. Measures the of power of the engine in Watts (W) – current drain on the battery
12. Indicates the compression of the brake levers, when flashing function recovery * (
)
13. Indicates light activation (
)
14. Surrounding temperature in °C or °F
* Recovery function can be set in several grades. Incorrect setting can damage your battery or other electrical
equipment components. For proper configuration, please contact the service partner EVBIKE.
Description of the control buttons:
On the control panel you will find three buttons arrow up
(UP), switch
ON/OFF (SW) and arrow down
(DOWN).
The system is protected against unnecessary battery discharge. In case of inactivity, i.e. the system does not
indicate any riding activity for longer than 5 minutes, the system will automatically switch off. To protect against
deep battery discharge always follow the instruction manual for the battery.
Quickly pressing the
(SW) button switches between the screens and displays the individual measured variables. If
during the ride you switch from the home screen to screen No.2. average speed (AVS) or to screen No.3. achieved
maximum speed (MXS), after 5 seconds the display again returns to the home screen with the value of the current
speed. On the home screen there it will remain either the amount of the daily distance (DST) or information about
the battery voltage (VOL.).
Functions of the system:
1.
Assistant for pushing the bike
– ( ) while the bike is stationary, press and hold the
(DOWN) button,
the bike will accelerate to a maximum speed of 6 km/wheel, such as on a very steep hill.
2.
Cruise control
– C (CRUISE) – while riding above 12 km / h, press and hold the
(DOWN) button.
The symbol (CRUISE) and C will light up instead of displaying the degree of assistance. This will fix a steady
speed and maintain it. The function can be immediately deactivated by pressing any button or brake lever.
