forth to ensure the E-juice is being soaked into the wicking material this will
stop you possibly using the unit dry and will stop you possibly burning the wick.
When you E-juice level starts to get low and you want to refill always remove
the atomiser and tank from the battery and repeat the filling instructions
above to avoid accidentally flooding your battery. Always keep external parts
and screw threads on both the battery and atomiser clean, dry and free from
dirt.
Cleaning the EGO-T
To clean out your EGO-T unscrew the atomiser and tank assembly from the
battery and empty any excess E-juice, run hot water into the tank and shake
and empty repeatedly until you are satisfied that the tank is suitably clean
repeat with the atomiser (never attempt to clean the tank and atomiser whilst
attached to the battery). Shake out any excess water and make sure the unit is
dry before re-using. A common problem after cleaning is that the unit has not
been dried completely and may appear to no longer produce vapour, this is
because the wicking material is still wet and has absorbed water which will
have to be replaced with E-juice as water does not produce vapour, taking a
few vapes once filled with E-juice will normally take care of this as the water is
evaporated and E-juice has absorbed back into the wicking material.
If there is anything you need/want to know about the EGO-T that has not
been covered in this guide feel free to contact us and we will be glad to
answer any questions and/or provide the help you need
