17
ATC-DC Condenser & eco-ATWB-H Closed Circuit Cooler
Accessory Location Checklist
Accessories can ship in a variety of locations depending on the type of accessory, the size of the unit and the accessories
purchased with the unit. See Table 6 for a guide to accessory location.
Unit Accessories
Shipping Location
Aluminum Ladder
Shipping Location is Unit and Accessory Dependent
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Shipped Separately on Truck Bed
Cap Channels for Multi Cell Units
Strapped Inside Unit Basin
Shipping Location is Unit Dependent
Discharge Attenuation
- 4' Wide Units: Shipped Separately on Truck Bed
- 8' Wide Units and Larger: Mounted Loosely Bolted on Basin
Shipping Location is Unit Dependent
Discharge Hood with Dampers
- 4' Wide Units: Shipped Separately on Truck Bed
- 8' Wide Units and Larger: Mounted Loosely Bolted on Basin
Shipping Location is Unit Dependent
Electric Basin Heater
- End Mounted Heater: Installed in Unit Basin
- Side Mounted Heater: Strapped Inside Unit Basin
Shipping Location is Dependent on Control Panel Size
Electric Basin Heater Control Panel
- If Space is Available: Mounted on Unit Basin
- If No Space is Available: Boxed, Wrapped and Wire Tied Inside Unit Basin
Electric Basin Heater Low Water Cutout
Shipped in Rigging Box
Shipping Location is Unit Dependent
Electric Basin Heater Thermostat
- End Mounted Thermostat: Mounted on Unit Basin
- Side Mounted Thermostat: Shipped in Rigging Box
Electronic Water Level Control Probes
Mounted in PVC standpipe
Electronic Water Level Control PVC Standpipe
Strapped Inside Unit Basin
Shipping Location is Unit and Accessory Dependent
External Service Platform with Ladder
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Factory Mounted Crossover Piping
Welded to Coil Connections
Shipping Location is Unit and Accessory Dependent
Fan Screens (If not mounted)
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Shipping Location is Unit and Accessory Dependent
Fan Screen Supports (If not mounted)
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Flume Plate
Mounted to Flume Box
Hot Water or Steam Coil
Installed in Unit Basin
Low Water Cutoff for Pump
Shipped in Rigging Box
Remote Sump Trash Screen
Installed In Unit Basin
Rigging Hardware
Shipped in Rigging Box
Safety Cage
Attached to the Ladder
Sealer Tape
Shipped in Rigging Box
Splash Guards for Multi Cell Units
Strapped Inside Unit Basin
Sump Sweeper Piping with and without
High Flow Eductors
Installed in Unit Basin
Shipping Location is Unit and Accessory Dependent
Vibration Isolation Rails
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Shipped Separately on Truck Bed
Vibration Switch
Mounted in Fan Section
Shipping Location is Unit and Accessory Dependent
Motor Davit and Base
- If Space is Available: Strapped Inside Unit Basin
- If No Space is Available: Crated and Shipped Separately on Truck Bed
Water Level Indicator
Strapped Inside Unit Basin
Water Silencers
Installed in Unit Basin
Table 6
- Unit Accessory Shipping Location
