EVAPCO ATC-DC Series Rigging And Assembly Instructions Download Page 1

Rigging and

Assembly Instructions

ATC-DC Condenser

eco-ATWB-H Closed Circuit Cooler

Bulletin 124H

Visit 

EVAPCO’s

Website at: 

http://www.evapco.com

EVAPCO...

S

PECIALISTS IN

H

EAT

T

RANSFER

P

RODUCTS AND

S

ERVICES

.

  EVAPCO, Inc. — World Headquarters & Research/Development Center

EVAPCO, Inc.

• P.O. Box 1300 • Westminster, MD 21158  USA

P

HONE

: 410-756-2600 • F

AX

: 410-756-6450 • E-

MAIL

: [email protected]

EVAPCO, Inc. 

World Headquarters

P.O. Box 1300
Westminster, MD 21158 USA
Phone: 410-756-2600   
Fax: 410-756-6450
E-mail: [email protected]

EVAPCO Asia/Pacific

EVAPCO Asia/Pacific Headquarters

1159 Luoning Rd. Baoshan Industrial Zone
Shanghai, P. R. China, Postal Code: 200949
Phone: (86) 21-6687-7786
Fax: (86) 21-6687-7008
E-mail: [email protected]

EVAPCO Europe

EVAPCO Europe BVBA
European Headquarters

Industrieterrein Oost 4010
3700 Tongeren, Belgium
Phone: (32) 12-395029
Fax: (32) 12-238527
E-mail: [email protected]

EVAPCO East

5151 Allendale Lane
Taneytown, MD 21787  USA
Phone:  410-756-2600
Fax:  410-756-6450
E-mail: [email protected]

EVAPCO Midwest

1723 York Road
Greenup, IL 62428  USA
Phone: 217-923-3431
Fax: 217-923-3300
E-mail: [email protected]

EVAPCO West

1900 West Almond Avenue
Madera, CA 93637  USA
Phone:  559-673-2207
Fax:  559-673-2378
E-mail: [email protected]

EVAPCO Iowa

925 Quality Drive
Lake View, IA 51450  USA
Phone:  712-657-3223
Fax:  712-657-3226

EVAPCO Iowa
Sales & Engineering

215 1st Street, NE
P.O. Box 88
Medford, MN 55049 USA
Phone: 507-446-8005
Fax: 507-446-8239
E-mail: [email protected]

EVAPCO Northwest

5775 S.W. Jean Road, Suite 104
Lake Oswego, Oregon 97035  USA
Phone:  503-639-2137
Fax:  503-639-1800

EVAPCO Newton

701 East Jourdan Street
Newton, IL 62448  USA
Phone:  618-783-3433
Fax:  618-783-3499
E-mail: [email protected]

EVAPCO-BLCT Dry Cooling, Inc.

981 US Highway 22 West
Bridgewater, New Jersey 08807  USA 
Phone:  1-908-379-2665
E-mail: [email protected]

Refrigeration Valves & 
Systems Corporation

A wholly owned subsidiary of EVAPCO, Inc.

1520 Crosswind Dr.
Bryan, TX 77808  USA
Phone:  979-778-0095
Fax:  979-778-0030
E-mail: [email protected]

EvapTech, Inc.

A wholly owned subsidiary of EVAPCO, Inc.

8331 Nieman Road
Lenexa, KS 66214  USA
Phone:  913-322-5165
Fax:  913-322-5166
E-mail: [email protected]

Tower Components, Inc.

A wholly owned subsidiary of EVAPCO, Inc.

5960 US HWY 64E
Ramseur, NC 27316
Phone:  336-824-2102
Fax:  336-824-2190
E-mail: [email protected]

EVAPCO Europe, S.r.l.

Via Ciro Menotti 10
I-20017 Passirana di Rho
Milan, Italy
Phone:  (39) 02-939-9041
Fax:  (39) 02-935-00840
E-mail: [email protected]

EVAPCO Europe, S.r.l.

Via Dosso 2
23020 Piateda Sondrio, Italy

EVAPCO Europe GmbH

Insterburger Straße 18
40670 Meerbusch, Germany
Phone:  (49) 2159-69560
Fax:  (49) 2159-695611
E-mail: [email protected]

Flex coil a/s

A wholly owned subsidiary of EVAPCO, Inc.

Knøsgårdvej 115
DK-9440 Aabybro Denmark
Phone:  (45) 9824 4999
Fax:  (45) 9824 4990
E-mail: [email protected]

EVAPCO S.A. (Pty.) Ltd.

A licensed manufacturer of EVAPCO, Inc.

18 Quality Road
Isando 1600
Republic of South Africa
Phone:  (27) 11-392-6630
Fax:  (27) 11-392-6615
E-mail: [email protected]

Evap Egypt Engineering Industries Co.

A licensed manufacturer of EVAPCO, Inc.

5 El Nasr Road
Nasr City, Cairo, Egypt
Phone: 2 02 24022866 /2 02 24044997
Fax: 2 02 24044667 /2 02 24044668
E-mail: [email protected] / [email protected]

EVAPCO (Shanghai) Refrigeration 
Equipment Co., Ltd.

1159 Luoning Rd., Baoshan Industrial Zone
Shanghai, P.R. China, Postal Code: 200949
Phone: (86) 21-6687-7786
Fax: (86) 21-6687-7008
E-mail: [email protected]

Beijing EVAPCO Refrigeration 
Equipment Co., Ltd.

No. 66, District 4, 
Yanqi Development Zone, Huairou, 
Beijing 101407 P.R. China
Phone:  (86) 10 6166-7238
Fax:  (86) 10 6166-7395
E-mail: [email protected]

EVAPCO Australia (Pty.) Ltd.

34-42 Melbourne Road
P.O. Box  436
Riverstone, N.S.W. Australia 2765
Phone:  (61) 2 9627-3322
Fax:  (61) 2 9627-1715
E-mail: [email protected]

EVAPCO Composites Sdn. Bhd

No. 70 (Lot 1289) Jalan Industri 2/3
Rawang Integrated Industrial Park
Rawang, Selangor, 48000 Malaysia
Phone: 60 3 6092-2209
Fax: 60 3 6092-2210

EvapTech Asia Pacific Sdn. Bhd

A wholly owned subsidiary of EvapTech, Inc.

B-6-1, IOI Boulevard
Jalan Kenari 5, Bandar Puchong Jaya
47170 Puchong, Selangor Darul Ehsan
Malaysia
Phone: (60-3) 8070-7255
Fax: (60-3) 8070-5731
E-mail: [email protected]

EVAPCO North America

EVAPCO Products are Manufactured Wordwide

Summary of Contents for ATC-DC Series





















Reviews: