NOTE:
• For hygienic reasons exchange the
water in the tank after 24 hours.
• To avoid fungi and bacteria leave
the lid open after use.
Ice cube container
Remove the ice cube container and clean it with
a mild detergent under running warm water.
Casing and Interior
• Clean casing and interior with a damp cloth
• Use a diluted solution of vinegar and water
Drain Residual water
Drain the residual water if the appliance is
not in use for a longer period of time.
Rest the appliance on a table edge. Hold a
bowl under residual water drain valve.
• Turn the residual water drain valve anti-
clock-wise to drain off the rest of water.
• Close the residual water drain valve after
the residual water has been drained.
Storage
• We recommend that you keep the
appliance in the original packing if you
do not intend using it for long periods.
• Always keep the appliance out of the reach
of children in a dry, well-ventilated place.
Troubleshooting
Problem
Possible Cause
Solution
WORK indicator light is Power Source is not switched on.
1. Check the power supply matches
not illuminating.
2. Check the power cord is connected
correctly
3. Internal components are damaged.
Contact Evakool.
ICE FULL indicator
1. Ice tray is full.
1. Remove the ice cubes.
light is illuminating.
2. Low-temperature protection
2. Move the Ice maker to a warmer
(temperature is lower than 5ºC).
place, where the ambient
temperature is higher than 5ºC.
ADD WATER indicator
Water Shortage
1. Add drinking water into Ice maker,
light is illuminating.
and press
Button.
2. Water supply system is damaged.
Contact Evakool.
ICE FULL and ADD
1. Ice Making box is inserted
1. Check whether any foreign body
WATER indicator lights
in wrong position.
stuck the Ice making box.
are both illuminating.
2. Internal components are damaged.
Ice making performance
Contact Evakool.
is not good. Abnormal
noise.
1. Heat elimination is bad.
1. Clean the dust on the cooling fan
2. Water temperature is too high.
and air inlet/outlet part.
3. Ambient temperature is too high.
2. Fill normal temperature water.
4. Refrigerant leaks.
3. Do not place the appliance in high
Fan or pump is damaged.
temperature conditions.
4. Refrigerating system is damaged.
Contact Evakool
.
Page 5
Summary of Contents for EK IceMaker
Page 8: ......
