Adventure Kings WiFi Fridge Manual
page 14
ERROR CODES
The Adventure Kings WiFi Fridge has an error system where a code is
displayed as a series of flashes over a four second period. Each sequence
of flashes indicates a specific error as shown in the table below.
Note:
this fridge is fitted with an automatic 60 second restart delay.
This will be activated if your fridge enters an error mode.
It is designed to protect the fridge if an error occurs.
CODE
WARNING
SOLUTION
1 flash
every four
seconds
Low voltage
•
Please check the source voltage to ensure it
is above the cut out range. Try lowering the
voltage cut out setting to LOW (page 2).
•
The vehicle cabling may be inadequate
or unsuitable. Please refer to the cable
specifications table on the next page for
correct cable thickness.
•
Try on another power source.
2 flashes
every four
seconds
Fan issue
•
Fan is drawing too many amps (over 1 amp)
– replace fan. Contact Evakool about this.
3 flashes
every four
seconds
Compressor
start issue
•
Unplug the refrigerator for 10 minutes and
then restart it.
•
Possible electronic box or compressor fault.
Contact Evakool about this.
•
Try on another power source.
4 flashes
every four
seconds
Compressor
speed is too low
•
Unplug the refrigerator for 10 minutes
and then restart it.
•
Reduce number of items inside of fridge.
•
Lower the ambient temperature near the
fridge by moving it away from heat sources
or into a cooler location.
•
Clean vents and ensure clear air flow
over compressor
5 flashes
every four
seconds
Ambient
temperature is
too high
•
Clean vents and ensure clear air flow
•
Fan fault – Contact Evakool to
replace the fan.
