Page
4
of
24
www.ev-hub.com.au
Hypervolt Home 2.0 – Installation Guide
1 – Positioning the Hypervolt Home
We advise that this should be the first action to be completed on-site. The installer should consult the
customer and establish their preferred installation location. This should take into consideration the cable
length (distance to the vehicle being charged), risk of vehicle impact and obstruction of access.
Keep in mind that the customer may change their mind with regards to the charger location once into place
and it is desirable this happens prior to routing any of the cables.
The Hypervolt Home 2.0 can be fitted indoors or outdoors.
2 – Preparing the Hypervolt Unit
In order to install the Hypervolt unit, you will need access to the main wiring terminal inside the device.
Place the unit on a secure surface and using a T20 Security Torx screwdriver, remove the 4 off screws (2 on
each side) which secure the front cover in place.
Remove the top cover. Simply slide it away from the rest of the unit. There should be almost no resistance in
doing so.