42
7.10.2 Selecting mg/l or ppm units
NOTE: This mode appears in mg/l (ppm) measurement mode only.
This mode lets you select between mg/l or ppm dissolved oxygen units.
From measurement mode
1.
Press the MODE key to select mg/l (ppm) mode.
2.
Press SETUP key to enter SETUP mode.
3. Press
▲
and
▼
keys to scroll through subgroups
until you view parameter “COF” in the upper
display.
4. Press the ENTER key until “dO” appears in the
upper display.
5. Press
▲
and
▼
keys to toggle between mg/l or
ppm units.
6. Press the ENTER key to confirm selection and
move to step 4 on page 43. Press the CAL/MEAS
key twice to return to measurement mode.
Figure 36: Change from mg/l to
ppm unit
Summary of Contents for WATERPROOF CYBERSCAN PD 300 PHDISSOLVED OXYGEN METER
Page 2: ......
Page 38: ...34 Figure 26 Change pressure units mm Hg or kPa adjusting its values...
Page 64: ...60 NOTES Date Time Recorded Value Remarks...
Page 65: ...61 NOTES...