EUTECH INSTRUMENTS ECOSCAN SALT 6 METER, Instruction Manual, Page: 26 / 40

Instruction Manual Salt 6
22
6.3 Normalization Temperature
You can set the meter to normalize its conductivity measurements to a standard
temperature of either 25 °C or 20 °C.
The default value is 25 °C.
1) Enter the advanced setup as described in
Section 6.1.
2) Press ▲ or ▼ key until [
t.nr °C
] appears
on the LCD. Press
ENTER
key.
3) Press ▲ or ▼ key to select either [
25.0
°C
] or [
20.0 °C
].
4) Press
ENTER
key to select. The meter
will take you back to the menu, [
t.nr °C
].
5) Press ▲ or ▼ key to move to the next
menu or press
CAL
to exit to
measurement mode.
C °
C °
C °
HOLD
ENTER