EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 1500 Instruction Manual Download Page 4 | Manualshive

Page: 4 / 56

EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 1500 Instruction Manual Download Page 4

Instruction Manual

CyberScan pH1500

2

1

INTRODUCTION

1.1 Introducing the CyberScan Series

Thank you for selecting the Eutech Instruments CyberScan pH1500
bench-top meter. This instruction manual describes the operation of
the meter. The state-of-art meter that you have purchased is easy to
operate and will guide you through the various functions by displaying
easy to understand prompts. This manual should answer any
questions that might arise in operating your meter, however, do not
hesitate to call our Technical Support at (65) 6778 6876 (ext 839) or
fax at (65) 6773 0836.

This instruction manual is designed to provide all the information
necessary to guide you through the process of measuring pH or mV
with a series of prompts on the screen.

)

You will find this symbol appearing in this manual; it indicates useful
tips that ease your meter operation.

The CyberScan pH1500 meter provides microprocessor precision in
a compact benchtop design that is easy to use. This metre allows you:

Measure pH, absolute mV or relative mV

Select one of three sets of standard buffer groups

Standardise with up to five buffers

It all adds up to rapid, completely automatic, intuitive operation.

«
...
2
3
4
5
6
...
»

Summary of Contents for CYBERCOMM PRO FOR CYBERSCAN PH 1500

























































Reviews:

No comments