Safety Information
The Eutech Controller/ Transmitter shall be installed and operated only in the manner specified in the
Instruction manual. Only skilled, trained or authorized person should carry out installation, setup and
operation of the instrument.
Before powering up the unit, make sure that power source it is connected to, is as specified in the top
label. Failure to do so may result in a permanent damage to the unit.
The unit has live and exposed parts inside. If it has to be opened, make sure that the power to the unit is
off and disconnected.
The unit is Fuse protected. In the event the fuse has to be replaced, use only those as specified in the
manual.
