Eusso 200Mbps Powerline HomePlug, User Manual

Page: 15 / 17

4. Select the “ ETH Connected Node ” and click the “ Factory Reset ” button.
Note: You can reset only 1 Powerline Adapter at a time. If you select a Powerline
Adapter listed in the section “ PLC Connected Node ”, the “ Factory Reset ” button is
not shown.
The Powerline Configurator will ask you for the Factory Reset Password. Enter the Factory
Reset Password (“
betera ”) and click “ OK ”. The Powerline Adapter will be set back to the
factory default settings.