15
EUROTRUSS
L I F T E R S
www.eurotruss.com
14
FLS-058
Operating Instructions - ENGLISH
1 - INTRODUCTION.
Dear user. Thank you purchasing your Eurotruss FLS-058 lifter. We hope you will be very
satisfied with it.
This manual has been written so that you can understand how to effectively use the lift
and most importantly, so that you can use it safely. It is important that you fully read the
manual and follow the instructions carefully before using your lift. All Eurotruss lifts un-
dergo a very strict quality control process during their manufacture.
So that your lift always works properly please only purchase original Eurotruss parts
from an authorized distributor or dealer. The user waives all warranty rights if using parts
other than Eurotruss or if the product is manipulated in any way by an unauthorized third
party.
When requesting parts, please refer to the diagrams of this manual and quote the
serial number and year of manufacture located on your lifter.
2 - TECHNICAL SPECIFICATIONS.
Eurotruss lifter, model FLS-058 has been designed for vertically lifting lighting, trussing
etc in the Professional sound and light sector. For various Eurotruss supports available
please refer to our website
www.eurotruss.com
or catalogue.
2.1 - Max. load: 300 kg (661.4 lb)
2.2 - Min. load: 25 kg (55 lb)
2.3 - Max. height: 5.95 m (19.52’)
2.4 - Folded height: 1.57 m (5.15’)
2.5 - Transport surface: 1,57x0.46x0.60m (5.15’x1.51’x1.97’).
2.6 - Shipping dimension: 1,70x0.47x0.63m (5.58’x1.54’x2.07’).
2.7 - Work surface: 1.91 x 2.15 m (6.26’ x 7.05’)
2.8 - Weight: 164 kg (361.56 lb)
2.9 - Winch: 900 kg certified
2.10 - Cable: Steel DIN 3060. Tensile strength 180 kg/mm
2
. Anti-torsion & anti-corrosion
Ø6 mm cable diameter.
2.11 - Construction material: Alluminium profiles 6082T6.
2.12 - Antirust protection priming paint bathed black steel, covered with cured polyester
dust.
15
FLS-058
Operating Instructions - ENGLISH
2.13 - Automatic Eurotruss Trigger (AET) on each section which automatically slots in to
the sections during elevation, locking them in place.
2.14 - Anchor of the legs by safety catches.
2.15 - Adjustable stabilizer plates in the legs with nonslip rubber base support.
2.16 - Spirit level for vertical alignment.
2.17 - Swivel wheels for transporting the lifter to its working position.
3 - SAFETY GUIDELINE.
3.1 - Situate the tower on a solid and flat surface.
3.2 - Check that the legs are fully inserted and secured in to their housing with the safety
locks.
3.3 - Ensure that the lifter is in a vertical position and use the spirit level located on the
base profile to check. If necessary, adjust its alignment with the plates by turning the
handle in the appropriate direction.
3.4 - Check that the tower is locked in its working position with the safety lock.
3.5 - When used outdoors, place the tower on a hard surface and if necessary secure it
against excess wind force via cable braces.
3.6 - Do not use ladders nor lean them against the lifter.
3.7 - Be careful with any cables, prominent objects etc. placed above the tower.
3.8 - Do not stand underneath the load.
3.9 - Do not move the tower when it is elevated or loaded.
3.10 - Before using the tower, check the condition of the cable. This must be free of cuts
and frays. Never use damaged cables.
3.11 - Never dismount the winch handle or any element of the winch under any circum-
stance.
3.12 - Once the tower is set-up in its working position we recommended the winch han-
dle is locked to avoid anyone interfering with it.
3.13 - The minimum load for a safe operation of the brake is 25 kg. The brake will not
function without this minimum load.
3.14 - Do not grease or lubricate the brake mechanism of the winch.
3.15 - This lift cannot lift human beings.
3.16 - For transportation it is necessary to retract all profiles and lock them with the
corresponding safety lock.
4 - OPERATION.
4.1 - Place the tower on a flat and solid surface where it is going to be used.