Page 17
GENIUS LCD 100
9. BASIC OPERATING MODES
HEATING PROFILE:
The heating and saving times can be defined by the freely adjustable time programme. GENIUS LCD 100 has the follo-
wing factory default setting:
Heating time: Heating to comfort temperature (factory setting): 1st heating time at 07:00 am)
Saving time: Reduction to economy temperature (factory setting: 1st saving time at 10:00 pm)
Create heating plans - define heating and saving times
With GENIUS LCD 100 you can set 4 heating and 4 saving times per day - for each day individually or for several days
in a block.
Individual days:
DAY1 for Monday, DAY2 for Tuesday, etc. appears in the display.
Select the day/block with PLUS/MINUS. Confirm with OK/SET.
Set the start of the 1st heating time with PLUS/MINUS.
Set the start of the 1st saving time with PLUS/MINUS.
Now you may enter a 2nd, 3rd and 4th heating/saving time.
|
If you do not want to set another heating/saving time, confirm the
„
----“ display with OK/SET. The next day to
be programmed appears in the display.
|
If you do not want to set another day, exit the menu with MENU.
|
It is also possible to overwrite individual days with deviating times within blocks.
Block formation:
D1 – 5 = same programme Monday to Friday
D1 – 6 = same programme Monday to Saturday
D1 – 7 = same programme Monday to Sunday
|
If days are not programmed, the factory settings remain active.
To set and save an individual programme, press MENU. Use PLUS/MINUS to select the HEATING PROFILE menu item.
WINDOW-OPEN-DETECTION:
The GENIUS LCD 100 automatically closes the heating valve to save energy if you open a window and the temperature
thereby drops significantly. If the window-open-detection is active, appears in the display. After the time you have
specified (e.g. 10 minutes), GENIUS LCD 100 resumes normal operation.
To configure the settings for the window-open-detection, select the menu item WINDOW-OPEN-DETECTION in the
MENU. Confirm with OK/SET. First, select the sensitivity with PLUS/MINUS (HIGH = high sensitivity (default), MID = me-
dium sensitivity, LOW = low sensitivity). Confirm with OK/SET. Then select the duration (e.g. 10 min (factory setting) -
60 min) for which the valve is to remain closed. Confirm with OK/SET. After the time has elapsed, the controller returns
to normal mode.
TEMPERATURE ADJUSTMENT:
If the perceived temperature deviates from the set temperature, you can carry out a temperature adjustment. To do
this, press MENU and select the menu item TEMPERATURE ADJUSTMENT with PLUS/MINUS. Confirm with OK/SET. The
degree setting 0.0° flashes in the display. Now set the desired adjustment (from -5 to 5°C) of the temperature using
PLUS/MINUS. Confirm your entry with OK/SET. The temperature indication in the display does not change!
