19
18
Adapter
WARNING
Remove the connecting pieces of the plastic adapter com-
pletely before you use one of the supplied adapter!
For the following valves no adapter is required:
Heimeier, Junkers Landy + Gyr, MNG, Honeywell, Brauk-
mann, as these have a thread of M30 x 1.5 mm. The adapt-
ers for Danfoss RAV (pin must be plugged on the valve
tappet) Danfoss RA and Danfoss RAVL are included.
For the following valves you need an adapter:
Herz M28 x 1.5 mm, Comap M28 x 1.5 mm, Vaillant 30.5
mm, Oventrop M30 x 1.0 mm, Meges M38 x 1,5 mmm,
Ondal M38 x 1.5mm, Giacomini 22.6 mm, Rossweiner M33
x 2.0 mm, Markaryd M28 x 1.0 mm, Ista M32 x 1.0 mm,
Vama M28 x 1.0 mm, Pettinaroli M28 x 1.5 mm, T+A M28 x
1.5 mm or Gampper 1,2,6.
If you are not sure which valve you have, see:
www.eurotronic.org/Produkte/Adapter
Information.
Here you will find a list of various valves and adapters.
INFO – Adapter
For other fee-based brass adapter types, see:
www.eurotronic.org/shop
For information on the adapters, see the point adapter
or see: www.eurotronic.org/Service/FAQ.
Press the button
MENU
and select with the setting wheel
the menu item
INST
. Confirm with
OK
. While the valve
completely retracts, Comet DECT stands on
PREP
. When
this process is finished,
INST
is again on the display. Un-
screw the cap nut and remove Comet DECT off the valve.
Technical specifications
Wireless standard DECT ULE
Range: in buildings up to 40 m
System requirement
FRITZ!Box
7490 or 7390
FRITZ!OS
from 6:35
2.
1.
Dismantling the Comet DECT
Heft-85x120mm-en.indd 18-19
Heft-85x120mm-en.indd 18-19
25.01.2016 15:52:21
25.01.2016 15:52:21
