Page 20/72
October 2019
W11E | Operation manual
Remove the attachment
The step is reversing as changing attachment step.
WARNING
Lifting devices and tools are only used for a specified purpose. Drivers must comply with the correctly and use the
lifting devices and tools. Do not enter or reach into the space between the arm and the frame.
WARNING
Before the operation of hydraulic systems, check if the functions of the various hydraulic joysticks are correct.
WARNING
Before disassemble the pipe of attachment, should release the rest pressure of this pipe, then disassemble the quick
change connector. The detailed method of release rest pressure is: swing the first valve handle (small handle) of
multi-valve left and right side several times.
WARNING
Even if the engine flameout can also lower the lifting devices and tools.
WARNING
If the tool is not delivered together with the loader, it can be only used after the authoritarian of stability and load
capacity by the dealer of EUROTRAC.
General preventive measures
•
Do not operate any levers or pedals if anyone is in any position to be hurt by the machine's movement.
•
Pay extra attention when working in narrow congested areas or in case of blind travel.
•
Always look around in all directions BEFORE changing your direction of travel.
•
Always follow all safety rules or each particular site during operation.
•
Maintain a running speed which is compatible with the load and the ground conditions.
Summary of Contents for W11E
