S 9358 /
KW9358W-c
Active outdoor upper temperature alert, the icon “
” below outdoor temperature digit would display.
Active outdoor upper& lower temperature alert, the icon “
” below outdoor temperature digit would display.
Active outdoor lower temperature alert, the icon “ ” below outdoor temperature digit would display.
Deactivate outdoor temperature alert, alert icon disappear.
Hold “ALERT” button for 3 seconds to enter outdoor temperature alert setting. Icon “
” or “
” below outdoor
temperature’s digits flash. Press “
▲
” or “
▼
“button to adjust the setting value, press “ALERT” to confirm the setting.
Setting sequence as follow: Upper limit of temperature, Lower limit of temperature.
When it’s alerting, the corresponding icon “
” or “
” would flash on the LCD. Press any buttons to stop the alert
sound.
5)
Radio Controlled Clock:
After power on the clock automatically starts to scan the DCF time signal. Radio Control Icon“
” flashes on the LCD.
flashes,
Indicating now is receiving
DCF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate timing. If reception fail, scanning
stops (“
” on LCD disappear)
The clock can be set to scan the time signal manually by holding “WAVE” button for 3 seconds. Each reception takes
about few minutes.
Stop scanning by holding “WAVE” button for 3 seconds.
“
DST
” shown on the LCD if it is in daylight saving time mode
6)
Manual Time Setting:
Hold “MODE” button for 3 seconds to enter settings, press “
▲
” or “
▼
” button to adjust setting. Press “MODE” to confirm
and move to the next setting.
The setting sequence are as follows: Weather forecast, RCC ON/OFF, Time Zone, 12/24Hour, Hour, Minute, Weekday
language, Year, Month-Day Sequence, Month, Day, Temperature Unit
10 languages can be selected in Day-of-week, they are: German (GE), English(EN), French(FR), Italian(IT), Dutch(NE),
Spanish(ES), Danish(DA), Czech(CZ), Russian(RU), Norwegian (NO)
The time zone is used for the countries that can receive the DCF time signal but the time zone is different from the
German time.
7)
Daily Snooze Alarm Function:
Press “MODE” button to select to view :
Time Alarm Time (“AL” Shown on the LCD)
Hold “ALARM” button for 3 seconds to enter alarm time setting. Press “
▲
” or “
▼
” button to adjust the alarm time. Press
“ALARM” button to confirm the setting.
Press “ALARM” button to switch alarm on or off. If it is on, “
” shown on the LCD.
When alarm sounds, press “SNOOZE” button to activate the snooze alarm, (“
” flash on the LCD). The alarm will snooze
for 5 minutes, then it alarms again. This snooze function can be enabled for maximum 7 times.
Except “Snooze” button, press any buttons to stop the snooze alarm.
8)
Moon Phase Display
Moon phase display would be changed base on the changing in date.
Summary of Contents for KW9358W-c
Page 25: ...S 9358 KW9358W c ...
Page 26: ...S 9358 KW9358W c ...