10
9.
Projection Setting
Note: Switch on the projection button for further operation.
9.1 Temporary Time & Temp Projection
When the clock is powered by batteries (not included), by touching
"
" , the projection will stay on for a few seconds, then the
projection will turn out automatically.
9.2 Permanent Time & Temp Projection
When the clock is powered by power adapter, the projection will
always light up.
Long press
"-"
button to adjust the projection angle by180
°.
The suggested distance of projection is 3.3
~
9.8 ft (1
-
3m). When
there is no light at night, the clock can clearly display the time and
temp on the wall or ceiling.
If you want to turn off the projection, switch off the button
mounted on the back.
Please take note of the following:
The power is not enough when using an old battery, please
connect the power adapter or replace with new batteries as soon
as possible.
