Eurotops 46397, Manual, Page: 21 / 22

GB
9. Slide the assembled brushes into the grooves on the rotor until each set clicks in place.
10. Clip the assembled hopper (g) on the handle (b) and slot the connectors into the recesses on the
sweeper body (m).
BEFORE USE:

Check that all nuts, bolts & screws are secure and tighten well.

Ensure the area of use is clear of obstructions before use.

Not recommended for use on long grass over approx. 6cm.

After an extended period without use, check all fixings are secure and check all moving parts and
lubricate if necessary.

Set to the designed height by loosening the knob in front of the sweeper body and re-tighten the
knob.

The lower setting is suitable for all surfaces. The middle setting is suitable for wet, slippery or rough
and loose surfaces. The higher setting is for maintenance and moving the sweeper.
DURING USE:

Take care to avoid injury to fingers when adjusting the machine.

Wear suitable eye protection and outdoor footwear.

Take extra care when changing direction or working on a slope. Keep the machine upright all the
time.