BK501
SOLAR WATCH
THE SOLAR WATCH HAS AN AUTO-SLEEP FUNCTION IN ORDER TO SAVE THE BATTERY. FOR THE FIRST USE, PLEASE
READ AND FOLLOW THE PROCEDURE AS INDICATED IN SECTION IV. AUTO-SLEEP FUNCTION.
I. DESCRIPTION
Fig. 1
Note :
These 2 buttons of S2 have the same function, you can press any one of them with the point of a pen.
II. SETTING THE TIME
•
Pull the S1 to position 1 and then turn in either direction to set the time.
•
Push the S1 back into position 0 to confirm and finish.
III. TIME TRACKING FUNCTION
•
This watch has a memory chip that allows to keep the correct time when the quartz movement disengages after
3 days in the dark, once the watch is re-exposed to light, the second hand will rotate very quickly to catch up the
correct time.
•
The automatic timing system works when the S1 is pulled out to position 1. When the S1 is pushed back into
position 0, the second hand keeps running fast to catch up the correct time.
IV. AUTO-SLEEP FUNCTION
•
If your watch has been in the dark without being exposed to light for three days consecutively, it will enter into
sleeping mode automatically in order to save the battery.
•
When the watch is exposed to light, all the needles begin to rotate rapidly and stop when they reach the correct
time.
•
In case the light is not strong enough, you can press any one of the buttons
S2
with a point of a pen, and the
watch will set itself.
V. BATTERY INDICATOR FUNCTION
Press any of the buttons S2 to check battery capacity:
If the second hand indicate 8, it means full charged.
If the second hand indicate 7, it means medium charged.
If the second hand indicate 6, it means poor charged.
If the second hand not indicate any of these 3 positions, please reset your watch. (See VI. RESET)
VI. RESET
