T 5005 / KD-5005
c.
The monitor will turn off automatically after 1 minute of no operation, with the
time and date unchanged.
d.
Once you change the batteries, you should readjust the time and date.
4.
CONNECTING THE CUFF TO THE MONITOR
Insert the cuff tubing connector into the socket in the left side of the monitor. Make certain
that the connector is completely inserted to avoid air leakage during blood pressure
measurements.
Avoid compression or restriction of the connection tubing during measurement
，
which may cause inflation error, or harmful injury due to continuous cuff pressure.
5.
Applying the cuff
a.
Pulling the cuff end through the medal loop (the cuff is packaged like this already), turn it
outward (away from your body) and tighten it and close the Velcro fastener.
b.
Place the cuff around a bare arm 1-2cm above the elbow joint.
c.
While seated, place palm upside in front of you on a flat surface such as a desk or table.
Position the air tube in the middle of your arm in line with your middle finger.
d.
The cuff should fit comfortably, yet snugly around your arm. You should be able to
insert one finger between your arm and the cuff.
6.
Body posture during measurement