o
ptional
f
eatureS
and
a
cceSSorieS
COMPACTFLASH SOCKET
CompactFlash socket is a Type II socket that can accept either Type I or II
cards. Use cards with a minimum of 4 Mbytes and a maximum of 2 Gbytes with
the PG6’s CompactFlash socket. Cards are available at most computer and
office supply retailers.
CompactFlash can be used for configuration transfers, larger configurations,
data logging, and trending.
Information stored on a CompactFlash card by a PG6 can be read by a card
reader attached to a PC. This information is stored in IBM (Windows
®
) PC
compatible FAT16 file format.
CompactFlash-
Insert Face Up
CompactFlas
h
(Top Side
)
OPTIONAL COMMUNICATION CARD
Invensys/Eurotherm offers optional communication cards for fieldbus
communications. These communication cards will allow your PG6 to
communicate with many of the popular fieldbus protocols.
Invensys/Eurotherm is also offering a communications card for additional
RS232 and RS422/485 communications. Visit Invensys/Eurotherm’s website for
information and availability of these cards.
Note: Do not remove or insert
the CompactFlash card while
power is applied. Refer to
“Front Panel LEDs.”
NOTE
For reliable operation of this and other Invensys/Eurotherm products, one
of the following brands of CompactFlash card must be used...
SimpleTech
SMART
®
Modular
SanDisk
®
Silicon Systems
Not all of the above manufacturers offer CompactFlash cards recognized
to UL standards, which may be required for your application.
Invensys Eurotherm USA Headquarters
44621 Guilford Drive Suite 100
Ashburn, VA 20147
Telephone: 703 724-7300
Fax 703 724-7301
Email: [email protected]