Eurotech VULCAN-533-M64-F16 Technical Manual Download Page 2 | Manualshive

Page: 2 / 61

background image

VULCAN Technical Manual

ISO 9001
FM12961

Definitions

Eurotech is the trading name for Eurotech Ltd.

Disclaimer

The information in this manual has been carefully checked and is believed to be accurate. Eurotech assumes no

responsibility for any infringements of patents or other rights of third parties, which may result from its use.
Eurotech assumes no responsibility for any inaccuracies that may be contained in this document. Eurotech makes no

commitment to update or keep current the information contained in this manual.
Eurotech reserves the right to make improvements to this document and/or product at any time and without notice.

Warranty

This product is supplied with a 3 year limited warranty. The product warranty covers failure of any Eurotech manufactured
product caused by manufacturing defects. The warranty on all third party manufactured products utilized by Eurotech is
limited to 1 year. Eurotech will make all reasonable effort to repair the product or replace it with an identical variant. Eurotech
reserves the right to replace the returned product with an alternative variant or an equivalent fit, form and functional product.
Delivery charges will apply to all returned products. Please check

www.eurotech-ltd.co.uk/support

for information about Product

Return Forms.

Trademarks

ARM and StrongARM are registered trademarks of ARM Ltd.

Intel and XScale are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and

other countries.
Windows CE .NET is a trademark of the Microsoft Corporation.
CompactFlash is the registered trademark of The CompactFlash Association.
Linux is a registered trademark of Linus Torvalds.
RedBoot and Red Hat

TM

is a registered trademark of Red Hat Inc.

All other trademarks recognised

.

Revision History

Manual PCB

Date

Comments

Issue A

11

th

June 2004

First full release of Manual.

Issue B

28

th

June 2004

Minor modifications.

Issue C

16

th

May 2005

Updated to reflect product name change.

Issue D

1

st

October 2007

Eurotech rebranding.

© 2007 Eurotech Ltd.
For contact details, see page

.

«
1
2
3
4
...
»

Summary of Contents for VULCAN-533-M64-F16






























































Reviews:

No comments

Related manuals for VULCAN-533-M64-F16

Brand: Faytech Pages: 2

Brand: Garelick Pages: 3

Brand: Rabbit Pages: 144

Brand: AXIOMTEK Pages: 2

Brand: Linear Technology Pages: 6

Brand: TYAN Pages: 117

ITX-945GC3B N330

Brand: OEM Pages: 38

Altera Lark Board

Brand: Embest Pages: 9

Brand: Gigabyte Pages: 40

Brand: Gigabyte Pages: 96

AN003 MPT11210IL

Brand: Modular Pages: 9

Brand: IEI Technology Pages: 162

Brand: JETWAY Pages: 44

Brand: Biostar Pages: 31

SAM9N12/CN11-EK

Brand: Atmel Pages: 69

Brand: Erreka Pages: 4

Brand: Gigabyte Pages: 96

Brand: Supermicro Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands