Getting started with your PROTEUS
19
Getting started with your PROTEUS
What do need?
There are three basic configurations that can be used to access to your PROTEUS board:
•
PROTEUS board, TFT LCD display kit, keyboard/mouse, USB hub, and power.
•
PROTEUS board, LVDS to VGA adapter, monitor, keyboard/mouse, USB hub, and power.
•
PROTEUS board with preinstalled remote access, Ethernet connection, network with DHCP
server, and power.
Connecting your PROTEUS
PROTEUS stand alone configuration
1.
Connect display/adapter cable to LVDS A connector (
J4
).
2.
Connect USB hub to USB connector.
3.
Connect keyboard and mouse to the USB hub.
4.
Connect green power connector plug to a cable coming from a DC power supply. The power
supply output voltage should be b8.5 to +24V (+12V nominal). Check polarity.
5.
Switch on display/monitor power.
6.
Connect power cable to the PROTEUS board.
7.
Switch on power supply.
The board starts with the Eurotech logo splash screen. If a device with booting capability is
connected (or on board FLASH is preloaded with OS) then the board boots from this, if not the
BIOS screen is shown.
