Top
board
Control panel
Door
Front vent flange
(only to front vent)
Side panel
Filter
Flexible
duct
(only to back vent)
Power plug
Switch
Tumble Door
7
8
•
not less than 10cm distance from the wall. It is suggested
there are no obstacles within 1.5m in front of dryer and
keep ventilated.
Dryer should be placed in a ventilated area with
>10cm
INSTALLATION
INSTALLATION
Product Description
Installation
Front panel
the dryer will work unbalanced or stop working sometimes.
if dryer could not be placed horizontally (the lean angle is no more than 2
°
,
Notice when installing:
•
Do not install the dryer in the open air or place easily
damaged by rain;
•
Do not place the back of dryer near curtain or something
in the wind;
•
Do not place the dryer near gas or flammable area.
•
• Connect one end of flex tube with whorl to the back vent, then fix it deasilly till tight.
• The other end of flex tube will be extended to outdoor, please refer the right
assemble way to the below pictures.
Flex tube fixing:
Note!
•
Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
