Eurotech DynaGATE 20-30 Series, User Manual

Page: 37 / 76

DynaGATE 20-30 User manual Rev. 0-7 8 Interfaces overview
8 I
NTERFACES OVERVIEW
8.1 Rear Side Interfaces overview
The Rear Side Interfaces are as follows:
Figure 8.1 - Rear Side Interfaces layout
Ref# Label Description
1 PWR Power IN Connector (Size 12, 3-pin MIL-26482 Male)
2 USB 0 1x USB 3.0 port Noise and Surge Protected
3 USB 1 1x USB 2.0 port Noise and Surge Protected
4 ETH 0 1x 10/100/1000 Mbps Ethernet Connector (8-pin X-coded M12 Female)
5 ETH 1 1x 10/100/1000 Mbps Ethernet Connector (8-pin X-coded M12 Female)
6 COM 0 1x RS-485/RS-422 (Default: RS-485 Full Duplex) Isolated Connector (DB9 Male)
7 COM 1 1x RS-232/RS-485/RS-422 (Default: RS-232 Isolated Connector (DB9 Male)
8 CAN 0 CAN 0 (CAN Specification 2.0, Parts A and B) Connector (DB9 Male)
9 CAN 1 CAN 1 (CAN Specification 2.0, Parts A and B) Connector (DB9 Male)
10 Earth Connection Terminal
11 A1 Ch0 Wi-Fi 2.4/5 GHz and Bluetooth 4.0 BLE Co-existence Antenna Connector (RP-SMA Female)
12 A2 Ch1 Wi-Fi 2.4/5 GHz and Bluetooth 4.0 BLE Co-existence Antenna Connector (RP-SMA Female)
13 A3 Cellular Main Antenna Connector (SMA Female):
l
Not Available for versions: -11, -21, -31, -41
l
LTE CAT 4 Global for versions: -10, -20, -22, -30, -40, -42
14 A4 Cellular Diversity Antenna Connector (SMA Female):
l
Not Available for versions: -11, -21, -31, -41
l
LTE CAT 4 Global for versions: -10, -20, -22, -30, -40, -42
15 A5 Reserved
16 A6 Reserved
17 A7 GNSS Antenna Connector (SMA Female)
Table 8.1 - Rear Side Interfaces description
37 / 76