Eurotech Arcom VULCAN, Quick Start Manual

Page: 15 / 25

VULCAN Quickstart Arcom Embedded Linux
Booting the system
Once the system has been connected and powered up as described in Unpacking and
connecting up , page 10 , the board automatically boots to a Linux prompt, as follows:
Uncompressing Linux......................................... done,
booting the kernel.
Linux version n.nn.nn
− arcomn − n − vulcan
CPU: XScale − IXP4xx/IXC11xx revision 1
Machine: Arcom VULCAN
...
INIT: version 2.78 booting
...
If you do not have a DHCP server and you have not configured a static IP
address, the board pauses at this point while it searches for a DHCP server.
See
Setting up networking , page 17 .
Configuring network interfaces... done.
...
INIT: Entering runlevel: 2
...
Arcom Embedded Linux VvIi (ttyS0)
vulcan login:
© 2005 Arcom Issue D
15