The specialist for fastening technology
9
Responsibilities of the user:
WARNING
The person responsible for the device must guarantee that other persons use the device according to the user manual.
The person responsible for the product has the following obligations:
• Understand the safety instructions on the product and the instructions in the user manual.
• Be familiar with the local safety regulations for accident prevention.
• Inform the local retailer without delay if the device is defective.
Dangers during use:
ATTENTION
Take note of incorrect survey measurements, if the device is defective or if it has been dropped, misused or modified.
Carry out regular test surveys. This is especially important if the device has not been exposed to normal use, before,
during and after important surveys. Ensure that the optical lenses are clean and that there is no mechanical damage to
the device.
Precautionary measures:
Use this product only as a measuring device, not as a control device. Your system must be designed and operated in a
manner that ensures that safety measures are in place in the event of an error, a malfunction of the device or a power
failure (e. g. safety limit switch), ensuring that no damage is caused.
WARNING
Used batteries must not be disposed of with household waste. Dispose of or recycle used batteries in compliance with
the relevant national or local regulations.
Do not dispose of or recycle this product with the household waste. Recycle this product in an appropriate
manner. Prevent access to the product by unauthorised personnel at all times. Take it to collection points provided in
accordance with national or local regulations.
For technical support, contact your local retailer.
Electro-magnetic compatibility (EMC):
The term “electromagnetic compatibility” refers to the ability of the product to operate in an environment in which
electromagnetic radiation and electrostatic discharges are likely to be present and without causing electromagnetic
interference to other devices.
WARNING
The product complies with the relevant standards and regulations. There is, however, the possibility that there may be
interference with other devices.
ATTENTION
Never attempt to repair the product yourself. Contact the local retailer in the event of damage.
Summary of Contents for Cross-line Laser
Page 1: ...USER MANUAL Cross line Laser ...
Page 3: ...The specialist for fastening technology 3 Procedure On Off On Off On Off ...
Page 4: ...The specialist for fastening technology 4 Self alignment mode Position the laser horizontally ...
Page 5: ...The specialist for fastening technology 5 Manual mode ...