EUROSTER 11K CONTROLLER USER MANUAL
2
2. VISIBLE CONTROLLER ELEMENTS
Lights Light ON means
1.
– ignition function ON
2.
/
– 1
st
/2
nd
sensor temperature reading displayed
3.
–alternative heat source ON
4.
,
,
– 1
st
/2
nd
/3
rd
pump ON
5.
– throttle open
6.
– room thermostat signal hooked up
7.
– controller power ON
Button functions
1.
– exit, cancel, turn the controller off
2.
– decrement the displayed value, turn the ignition off
3.
– increment the displayed value, turn the ignition on
4.
–
accept the displayed value, turn the controller on, enter the setup mode.
3. INSTALLATION
ATTENTION Hazardous voltages may be present inside the controller and
on its cables. Therefore it is expressly forbidden to install the device unless
its mains power supply is disconnected. Only qualified technicians may
install the controller. Do not install any device showing signs of any
mechanical damage.
