User manual TOM600
Item partnumber : 61-200-0600
9
•
Ring Electrode to EOS/ESD S 11.11 + DIN EN
61340 –5-1, -2-3
comprising to the measurement of transit and surface
resistances, 1 shielded and 1 no shielded Measure
cord.
other electrodes are available on inquiry
11. Maintenance / Calibration
The appliance is maintenance-free. If the appliance should get dirty , it can be cleaned with a lint-free cotton
cloth with solvent-free detergent.
Don’t open the housing. When the housing was opened you loose warranty.
If the appliance should not be used for a longer time, remove the Batteries out of the appliance.
The interval for factory calibration is normally 1 year.
12. Legend
1 Power Supply connector 9V DC
2 Serial PC – Interface
3 Measure Voltage Output
4 Measure Input
5 Contrast – Potentiometer for LC Display
6
Temperature / Humidty - Sensor
7 Charge control LED
