11
Operating the receiver
ON/OFF
You can switch the receiver on by pressing
; OK, CH
s
or CH
t
or with one of the
number buttons. The last activated channel will be displayed (e.g. 0015).
The digital receiver is switched in Standbymode by pressing .
Tip:
Only by pulling the power plug you can disconnect the receiver from the power supply
system.
Choosing the mode of operation
You can choose between the operation mode TV (TV channels) and RADIO (radio channels)
by pressing TV or RADIO.
Volume control muting
Please notice that you can´t change the volume during the receiver is in menu. By pressing
VOL
►
or VOL
◄
. Afterwards you can see a volume control scale on the screen.
Tip:
volume changes regulate the signals at the TV, VCR and AUDIO L R ports of the
receiver.
By pressing the
button you can totally switch the volume off. To switch volume on press the
button again.
Choosing the programme
1.
Normal switching
To change the programmes stepwise press the buttons CH •
or CH •. In order to
switch the programmes quicker hold the buttons pressed accordingly longer.
2.
Switching by direct intake
One- or more digit programme numbers can be entered by typing 1-0 on the remote
control and entering OK. Programme places not programmed will be ignored.
3.
Choosing programmes from the channel list
By pressing the LIST button the last activated channel list or the favourites list is
shown. Browse the channel list by pressing VOL
◄►
. By pressing CH •
or CH •
choose the programme you wish and press OK then.