background image

RELEASE ER2017_06_

13

Installation and maintanance manual

Projector lift Mod. SI-H 100

This document is property of Euroscreen Srl.

Any distribution, reproduction, copying or publication of this document is prohibited.

1.7.6  Warranty is officially voided in case of:

repairing, modifications or components’ removing and substitution  

 

not previously agreed and authorized by the manufacturer;

improper use from the end user;

lack of checking of the projector lift following the check register in  

 

chapter 6.0.

For these reasons, we suggest to inform promptly the manufacturer in case of 

malfunctions or faults of the lift.
1.7.7  The actual installation manual with all its attachments represents the 

official and only documentation of this product and it has to be archived and 

used during the entire lifetime of the product.
1.7.8  In case the lift is passed to a third party, it is COMPULSORY that the 

user hands over to the third party this document and to inform the manufacturer 

of full name and address of the new owner.
1.7.9  The manufacturer reserves the right to modify at any time all the 

technical documentation and, consequently, the installation manual of the 

product without obligation of notice to the end users.
1.7.10  This  installation  manual  is  exclusively  property  of  the  manufacturer. 

Handling of this installation manual has to be authorized by the manufacturer. It 

is forbidden to copy, reproducing even partially, drawings and documentation 

included in this manual.

All violations are punishable by law and subject to compensation for damages 

under the protection of commercial rights.

It is allowed to keep one copy only for archive purposes.

Summary of Contents for SI-H 100








































Reviews: