RELEASE ER2017_06_
13
Installation and maintanance manual
Projector lift Mod. SI-H 100
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Connect the projector lift to the mains as explained in chapter 4.5 and lower
the plate for fixing the projector to the desired height in order to fix the video-
projector with suitable screws (NOT supplied).
Please take care that the projector’s
centre of gravity is located in the
middle of the plate.
In order to define the ideal position of
the projector, please use a sprit level.
4.4
MOUNTING OF THE VIDEOPROJECTOR
All the power and signal cables
have to be stored inside the cable
management system.
WARNING: Use flexible cable only.
Cables that cannot be properly
bended are not allowed.
Insert and fix the cables only when
the lift is completely in open position.
