201704-217-ENG
User manual - MIXPRO 70 mixer
P13
5. USE OF THE MACHINE (continued)
5.2. START-UP
1. Plug the mixer in, the display (J) indicates "AU" (emergency stop). Turn the red button (AU) to
deactivate it.
2. The display (J) indicates "OFF", press the ON/OFF button (1) to start the mixer, the light (L1) lights
up.
3. The display (J) correspond to the mixing speed from 0 to 100%. The display (K) correspond to the
water flow-rate in litre per hour.
4.
Connect the mixer to the water supply with help of the quick-connect (B).
5. Place a bucket beneath the mixer exit (E).
6.
Press the WATER BACK button (6), then set the water flow-rate to 250 L/h (indicated on the display
(K)) with help of the regulation valve (C).
7. Put the mixer in manual mode by pressing the button (2), the light (L2) lights up.
8.
Set the mixing speed to 50% with help of the (4) and (5) buttons.
9.
Break the bags of powder on the grid (A) to fill the tank.
10. Press the MANU button (2) to start the mixer.
11.
Let the product flow in the bucket for 20 seconds, so the mixing is stabilized.
12.
The product will be very liquid at first, then it will reach the desired texture, depending on the
selected settings.
13.
To improve the setting, increase or decrease the speed on the display (J) with help of the (4) and
(5) buttons. Increase the speed will make the product drier, descrease the speed will make it more
liquid.
14. When the desired texture is reached, press the button (2) to put the mixer in STOP mode, the light
(L3) lights up.
15. If the Mixer is used alone, press again the button (2) to put the mixer back in manual mode.
16.
If the mixer is coupled with a machine, put the mixer in AUTO mode with help of the (3) button.
The product will flow by the exit (E) in the tank of the machine. The level detector (D) manage
automatically the the start or stop of the mixer, depending on the product level in the tank (
see 5.6.
"Setting of the level detector", page 15
).
