201306-021-ENG
User Manual - MIXPRO 14 - V3
P5
WARNING
1- GROUNDING.
All machines must be grounded when operating, to protect the operator from eletrical shocks. All our
machines are equipped with a standardised plug.
The electrical connections must be performed by a qualified electrician. Any modifications or disassembly
of the machine is prohibited notably with regard to the electrical box.
Repairs must be performed by an approved centre or by our after-sales servicing department.
When any work is being carried out on the machine ensure that the ground is connected.
2- EXTENSION CORDS.
When using extension cords ensure that these are grounded and that they cannot be run over or da-
maged. Check that the section of the extension cord cable used is sufficient for the current of the device
being operated. An extension cord that is too fine may cause voltage drops and damage to the device.
In the case of a reel being used, it is imperative that it is fully unwound, otherwise the device may be
damaged. The section must be proportionate to the length of the cable (see table).
TABLE: Single phase
Power
CV (736w) KW
Section
in mm
2
1
0.7
1.5
1.5
1.1
1.5
2
1.5
2.5
3
2.2
2.5
Extension cords over 40 metres in length must have a larger section size.
USE AND MAINTENANCE
NOTE:
The information indicated in this manual is intended to help the operator during use and with mainte-
nance operations on the machine.
ELECTRICAL CONNECTION
THE ELECTRICAL CONNECTION OF MACHINERY MUST BE CARRIED OUT USING 16A 230V SOCKETS
WITH A DIFFERENTIAL CIRCUIT BREAKER.
INTERVENTION PROCEDURES FOR MINOR ANOMALIES
Before proceeding with any intervention on the machine, check that it is disconnected from the
power supply.
