'default' setting and must be given new codes.
Check with the property management office or
building security as to the policy for submitting your
codes to them or receiving your codes from them. The
programming of the codes into the system must be
done by management/security and may require you to
prepare a list noting the user number followed by a
four digit code. After these codes have been entered
into the system, then you may then use the codes on
your suite unit.
ZONE ASSIGNMENT TABLE
The following table may be filled out to provide a
description of the protection circuit connected to each
zone in the suite unit. When a zone is off-normal, the
corresponding LED on the suite unit will light.
ZONE
DESCRIPTION
1
2
3
4
5
6
6
