To bypass a zone, firmly press and release the
FUNCTION
button and then the number 3 button.
The BYPASS LED (lower right front) on the suite
unit will be blinking. Firmly press the number of the
zone to be bypassed (1-4) and the blinking led will
be on steady. The zone is now bypassed. To bypass
additional zones, repeat the above procedure.
To unbypass a zone(s), disarm the suite unit (see
page 2). The bypass LED will extinguish.
5
USER CODES
The suite panel can be operated by five different users.
These persons are called USER 1, USER 2, USER 3,
etc. By identifying who armed and disarmed your
suite unit, this will create an audit trail which will let
you know who has been in and out of your suite. A
user must be given a four digit code. It is important
not to forget these codes.
USING THE DEFAULT CODE
When you take occupancy of your suite, a default
user code' 1010' has been assigned to user number 1.
Since all suite units in the building will be given same
code, it is essential that this code be changed to one
that you prefer. It may be your year of birth, the last
four digits of your telephone number, or any other
number from '0001' to '9999'. Users 2 thru 5 have no
