Document ID: 39080000
Rev: C
Technical Support: 1-800-626-6912
Page 14 of 26
STEP 9
Attach water and drain connections at rear of assembled unit and test for leaks.
Be sure to add a
vacuum breaker if required by your specific plumbing codes.
STEP 10
Take the transformer that is shipped with the chair and plug that into the power strip and run the cord
underneath the extension and out the top of the rear access hole.
STEP 11
Place both access covers over holes and tighten down using the (4) supplied screws and Phillips
Screw Driver.
