Document ID:06080001
Rev: L
Technical Support: 800-626-6912
Page 23 of 24
R
EMOVING
/
R
EPLACING
D
RAIN
H
ANDLE
Tools required:
Phillips head screwdriver
Check your state and local regulations for cleaning procedures. Links to your state boards can be
found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed
“Crystal Clean™ Pipe-Free
®
Spa - Cleaning and Disinfecting Procedures,” page 17, and “Traditional
Whirlpool
(With Jets)
- Spa Cleaning and Disinfecting Procedures,” page 19, for cleaning
recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1:
To remove the chrome handle pull it
forward. If difficult to remove, gently pry it off
with the screwdriver.
Step 3:
Picture, with the adapter removed,
shown for cleaning reference.
Step 2:
To remove the handle adapter, place
Phillips head screwdriver into upper slot to reach
screw, as shown in picture above. Unscrew and
then pull adapter forward.
Step 4:
Picture, with Drain Plunger removed,
shown for cleaning reference.
R
EMOVING
/
R
EPLACING
I
MPELLER
Check your state and local regulations for cleaning procedures. Links to your state boards can be
found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed
“Crystal Clean™ Pipe-Free
®
Spa - Cleaning and Disinfecting Procedures,” page 17, for cleaning
recommendations.
Follow the steps below for cleaning and replacing parts:
Step 1:
Remove the Knobs by
turning counter clockwise.
Step 3:
Unscrew to remove the
impeller knob.
Step 5:
Complete
steps 1
through 4 in reverse to replace
the parts.
Step 2:
Lift the footplate to
remove.
Step 4:
Lift the impeller.
Step 6:
Press firmly down on
footplate to help seal
while
tightening Knobs.
