SNOWING CHRISTMAS TREE
8
4.
Take the base, the base support and the included screws
and attach the base support at the base as shown in the
following illustration.
5.
Place the circle construction in the cloth cover. Tighten the
rope and fix it with knots. In this way, the shape is created.
6. Make sure that the circle construction is completely coverd
by the cloth and that the rope is tightly fixed. In order to
have a beautiful cloth, you can move the vertical folds.
7. Plug the power unit into the controller socket. Place the
base at the desired position on the floor. Make sure that
the controller and the power unit are outside the base in
order to operate them later.
8. Take both parts of the Christmas tree and insert the lower
part first into the socket holder. Turn the tube so that the
drilling in the socket and in the tree match with each other
and tighten the screw.
9.
Connect the upper tree part to the lower part. Caution!
Tightly engage both parts. Any leakage during operation
may cause unwanted spraying of the snowflakes.
