SNOWING CHRISTMAS TREE
7
3. Parts frame assembling
Illustr.
Description
Qty
Length
5-1
Short base poles
8
257 mm
5-2
Support base poles
8
457 mm
5-3
Long base poles
8
447 mm
5-4
T-connector
16
-
4. Installation
1. Unpack the individual parts.
Connect the 8 long base poles (5-3) via 8 T-connectors (5-
4). Make sure that the pole ends are completely inserted
into the connectors in order to have a stable construction.
Direct all T-connectors in the same direction.
2. Now bend the connected poles into a circle as shown.
Make sure there is no bystander or fragile object nearby,
so as not to cause injury or damage in the event any
connecting pole slips out of hand.
3. Make a second circle by connecting the 8 short base poles
(5-1) via 8 T-connectors (5-4). Connect both circles with the
support base poles (5-2).
Caution: by bending the poles, an enourmous power is
built up. Please be careful that you do not let loose the
poles. In order to avoid accidents, make sure that there
are no persons or fragile objects in the nearby area. Do
not bend the poles too much, otherwise they make
break.
The hazards as described above are also valid for
breaking down the construction.
