EuropAce EDY 5701T, Manual

Page: 21 / 26

It is important not to connect the vent hose to,for example,a cooker hood,or a chimney
or flue pipe designed to carry the exhaust from a fuel burning appliance.
Note that to avoid condensation problems,it is essential that the dryer be fitted with the
flexible hose to carry its auste outside the kitchen.
In order to prevent the appliance form overheating,it is important that the steam exhaust
is unobstructed.
If the dryer is fitted next to kitchen units, make sure that the vent hose is not squashed.
If the hose is partially squashed, drying efficiency will be reduced, resulting in longer drying
time and higher energy consumption. If the hose is completely squashed, the safety cut-out
with which the machine is fitted may operate.
That adequate ventilation has to be provided to aviod the back flow of gases into the room
from appliances burning other fuels, including open fires.
For appliances with ventilation openings in the base, that a carpet must not obstruct the openings.
Stacking kit
Any electrical work required to install this appliance should be carried out by a qualified electrician
or competent person.
Electrical connection
The manufacturer declines any liability should this safety measure not be observed.
Before switching on, make sure the electricity supply voltage is the same as that indicated on the
appliance's rating plate.
Should the plug need to be replaced for any reason, proceed as described below.
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow-Earth
Blue-Neutral
Brown-Live
The wire coloured green and yellow must be connected to the terminal marked with the letter
or by the earth symbol or coloured green and yellow
.
18